News — color
What Makes 800T the Original and Only True 800-Speed Tungsten-Balanced Film for Still Photography
Posted by CineStill on
When searching for CineStill films have you come across any “brand new” color films “made by” random brands lately? Are their claims strikingly similar somehow? Have they cracked the CineStill code? No, they have not… Through thorough quality assurance, we have concluded that true 800T — utilizing our meticulous and unique production process — is the only color film that can stand behind the claim of being both 800-speed and Tungsten balanced. This article will further explain how we came to this conclusion and go into detail showing the results of our extensive testing. We are not here to be nit-picky or point fingers and name names — which might get a little confusing — but some names may sound familiar to you by now. Those “800T” imitations and “400D” generics (repurposed from existing 500-speed or 250-speed motion picture film, respectively) are not representative of the original motion picture film’s quality nor the performance of CineStill films’ sensitivity and color fidelity. Although they may replicate the signature CineStill red halation glow, they are only somewhat comparable to expired film, in that they appear age fogged with shifted color-balance and exhibit a slower effective film-speed (200-400 ISO at best) resulting in a film not suitable for proposed use, let alone low-light photography; that is unless you like underexposed/expired film. For those looking for fresh film, we are fortunate to still have several other excellent high-speed color films available today (even with the recent unavailability of 400H and C200) — from UltraMax and Portra 400 to Lomo 800 and Portra 800 — but 800T is still the only tungsten-balanced, true 800-speed film made for still photography. Anything else, isn’t…
Read more →
Why the CS-Lite color modes are important for camera scanning
Posted by CineStill on
The real secret to a workable camera scan is getting a good initial capture in camera so that you don’t have to push or stretch the file more than it's bit depth or the software can handle. This means getting an appropriate exposure and color balance at the moment of capture.
With the new CS-LITE, there are 3 color modes built in: Warm for slides, White for black and white film, and Cool mode for color negatives. So for this post, we’re putting all 3 color modes to the test to show you the difference.
Raw CaptureCool | White | Warm
Due to the orange mask which is present when scanning color negatives, using any other scanning light source (or our CS-LITE set to the White light mode), you will need to do more than just invert the negative with added contrast and adjust color temperature further for good color, resulting in the need to use the fringes of what the sensors is capable of recording, similar to underexposing or blowing your highlights by overexposing your capture, but only in one or two color channels. RAW files are fantastic if you miss exposure a little bit, but there are limits. For example, you don’t want to underexpose your capture too much or you will see a lot of noise and contrast and color will be hard to control.
Inverted with LR CurvesCool | White | Warm
It needed hardly any RGB midpoint correction to adjust for the Cool setting and likely only because this was 800T in open shade, otherwise I would have been able to correct color using only white balance if it were shot on 400D or with an 85 warming filter on the lens. It is very apparent that the White and Warm light modes require quite a bit more adjustment, even when adjusting the RGB midpoints in tone curves...
Read more →
Introducing: Cs2 “Cine Simplified” ECN 2-Bath Kit, for Low-Contrast Motion Picture Color Negatives
Posted by CineStill on
After years of research and development, we’re are proud to release our reinterpretation of classic cinematic chemistry, the CineStill way. Following the lead of our other chemistry offerings, simplicity is key. As with Cs41 “Color Simplified” 2-Bath kit, the Df96 Monobath Single-Step solution, and the Cs6 “Creative Slide” 3-Bath process, we are making at-home processing modernized, simplified, and safe.
Introducing the CineStill Cs2 “Cine Simplified” ECN 2-Bath Kit. Low contrast, cinema style processing for all color film. A complete, easy-to-use, 2-bath process for photographers, which produces low-contrast color negatives synonymous with the motion picture workflow. A safe and foolproof process, without all of the troublesome byproducts of the original industrial method.
Read more →
A DP's Point of View - CineStill 50D & 800T by Rob Hauer
Posted by CineStill on
CineStill 50Daylight |
You may recognize the above image by Rob Hauer from our web site sample images of our 50Daylight emulsion. Rob was an early tester of our CineStill 50Daylight emulsion, but since then he has continued to capture beautiful images on CineStill 50D and 800T with an incredible eye for composition and light! It is really interesting to see what a director of photography does with...
Read more →
COMMITMENT, PASSION, RESOLVE! - The Future of CineStill 120
Posted by CineStill on
CineStill 800Tungsten 120 Beta by Laura E. Partain |
To all those who have supported, promoted and pushed our KICKSTARTER campaign for medium format, thank you! The support we have seen throughout our...
Read more →
"Cigarettes & Coffee Porter" on 800T by Jessica Palopoli
Posted by CineStill on